ROTARY METERS

 

MECHANICAL ROTARY METERS
STANDARD COUNTER (STD CTR)

STD CTR meters are intended for use where compensation to standard base condition is not required. STD CTR meters do not have any gas compensating features. When stable gas temperatures and pressures are significantly higher or lower then standard base condition, predetermined temperature and/or pressure factors can be independently applied to correct the STD CTR index readings to a base condition. Alternatively, it can be paired with a standalone volume corrector.


The maximum allowable operating pressure (MAOP) of the pressure body is: 

175 psig / 12 bar / 1206 kPa.


AVAILABLE IN THREADED AND ANSI AND DIN FLANGE CONNECTIONS


Sizes Available :

Imperial (RM)
600, 1000, 1500, 2000, 3000, 5000, 7000, 11000, 16000, 23000, 25000, 38000, 56000

Soft Metric (RM)
16, 30, 40, 55, 85, 140, 200, 300, 450, 650, 700, 1100, 1600

Hard Metric (G)
10, 16, 25, 40, 65, 100, 160, 250, 400, 400-150, 650, 1000

Contact ROMET for further information and literature.

When stable gas temperatures and pressure are significantly higher or lower than the standard base condition, predetermined temperature and/or pressure factors can be independently applied to correct  the STD CTR index readings to a base condition. Alternatively, it can be paired with a standalone volume corrector.
The maximum allowable operating pressure (MAOP) of the pressure body is: 

175 psig / 12 bar / 1206 kPa.

AVAILABLE IN ANSI AND DIN FLANGES

X
ORDER FORM
“ Please fill the form completely. ”
       
1080 Matheson Blvd. East Mississauga, Ontario   (905) 624-1591 / romet@rometlimited.com
sitepress